###
有色金属(选矿部分):2020,(4):105-111
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
铜浮选专家控制系统设计与应用
刘金优, Filiberto Orrante, 刘华锋, 程堆强
(通标标准技术服务有限公司)
Design and Application of Expert Control System in the Copper Flotation Process
LIU Jinyou, Filiberto Orrante, LIU Huafeng, CHENG Duiqiang
(SGS-CSTC Standards Technical Services Co.,Ltd)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2563次   下载 1202
投稿时间:2020-02-27    修订日期:2020-03-04
中文摘要: 针对国内某选矿厂铜浮选工艺泡沫速率不稳定,精矿品位波动大,回收率不理想等特点,本文设计了一套浮选专家控制系统,该系统结合泡沫影像分析技术,在线品位分析技术,PID控制与模糊逻辑控制技术。系统架构简明合理,逻辑层次清晰有效,投入运行一段时间后,在不同原矿品位前提下,都能实现稳定泡沫速率,减少精矿品位波动,提高回收率等指标优化,同时药剂添加量也有明显减少。这表明该系统运行效果良好,值得应用推广。
Abstract:Aiming at some unsatisfactory properties of the copper flotation process in a domestic plant, such as: unstable froth velocity, high variation of concentrate grade and low recovery, a flotation expert control system was designed, which combines froth image analysis technology, on-line grade analysis technology, PID control and fuzzy logic control technology. The system structure is reasonable, and the logic level is clear. After running for a period, stable froth velocity, decrease of concentrate grade variation and increase of recovery can all be achieved under different raw grade situations. Meanwhile, the dosage of reagents was also reduced obviously. The results showed that the system works well and is worthy of applying and promoting.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
刘金优,Filiberto Orrante,刘华锋,程堆强.铜浮选专家控制系统设计与应用[J].有色金属(选矿部分),2020(4):105-111.
LIU Jinyou,Filiberto Orrante,LIU Huafeng,CHENG Duiqiang.Design and Application of Expert Control System in the Copper Flotation Process[J].Nonferrous Metals(Mineral Processing Section),2020(4):105-111.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线

杂志信息

期刊简介

相关下载

联系我们

电话:10-63299852/63299758

传真:10-63299754

QQ:XXXXXXX

Email:YSXK@BGRIMM.COM

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号